7 Pocket Flame Resistant Coverall

Description

• 2 Chest Patch Pockets
• 2 Rear Patch Pockets
• 2 Front In-seam Pockets
• 1 Tool Pocket on Leg
• Zipper Front Closure
• Available Sizes: Regular Small to 5XL and special order Short or Tall
• Colors: Navy Blue, Medium Blue, Royal Blue, Denim Blue, Light Blue, Gold, Orange, Grey, Khaki, White. (color depends on selection of flame resistant fabric)
• Fabrics: FRT Treated Banox Certified 7 oz., FRT Treated Banwear 7 oz., FRT Treated Banwear 9 oz., IFR Inherent Dupont Protera 6 oz., IFR Inherent Dupont Protera 8 oz., IFR Inherent Tecasafe Plus 7 oz., IFR Inherent Oberon Denim 9 oz., IFR Inherent Oberon Denim 13 oz., IFR Inherent Glenguard 6 oz., IFR Inherent Dupont Nomex IIIA 4.5 oz., IFR Inherent Dupont Nomex IIIA 6 oz.
• Meets Standards: NFPA 70E/Z462 HRC 2, ASTM F1930
• We manufacture garments with sizing that conforms with EN-13402

Embroidery

Logos, Monograms to identify your company and/or the worker. Made only with FR thread. Suitable for all Oberon Arc Flash clothing. Text Logo Embroidery to identify your company or the employee (text only). Premium Image Logo Embroidery – Accurate reproduction of your company’s logo.

Prices and setup fees will vary based on the complexity of the artwork provided. Contact Macron Safety Customer Service for additional details on embroidery program and to request embroidery service order form.

Any doubts that your company is compliant? Your employees safe?

The 2012 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2012.

Do you and your employees know all of the changes? Have they been implemented into your Electrical Safety Program? Do you have an Electrical Safety Program? Have you had Electrical Safety Training in the last year?

If the answer to any of those questions is no, then contact Macron Safety today!

Call 916-905-6535 or contact us to be certain you are in compliance.

Determine the Correct Protection Level

To evaluate Fire Retardant clothing materials in order to measure the heat transferred through the fabric, two values are calculated: Arc Thermal Performance Value (ATPV)…the minimum energy causing the predicted onset of second-degree burns and Heat Attenuation Factor (HAF)…the percentage of total energy of the arc that the fabric prevents from passing through, OSHA requires that each employer must assess the potential hazards in the work environment and determine the appropriate clothing materials using ASTM PS57-97. Always do a hazard assessment. You will need to know electrical system voltage, fault current available, number of phases, Arc time duration, estimated Arc gap, minimum distance from the Arc, and Arc configuration.

Free Duke Power Heat Flux Calculator: For the purpose of calculating heat flux received at a surface some distance from an Electric Arc.

Electrical Safety Compliance Chart for NFPA 70E 2012